Kayman-KY102
| General | |
|---|---|
| Type: | Line array |
| Transducers: | 8 x 4″ neodymium magnet woofers |
| Frequency Response: | 120 Hz – 20 kHz (-6 dB)
(1) |
| Frequency Response (Full-range preset) | 70 Hz – 20 kHz (-6 dB)
(2) |
| Max SPL: | 138 dB (peak)
(3) |
| Max SPL(Full-Range preset): | 126 dB (peak)
(4) |
| Rated Power: | 1200 W |
| Coverage: | V. 7° – 30° | H. 90° |
| Connectors: | SpeakOn NL4 1+ 1- (signal); 2+ 2- (through) |
| Nominal Impedance: | 8 Ω / 32 Ω selectable |
| Handling and Finishes | |
| Dimensions (W x H x D): | 116 x 1000 x 134 mm (4.6 x 39.4 x 5.3 in) |
| Weight: | 14.9 kg (32.8 lb) |
| Material: | Stainless Steel |
| Colors: | Black, White, Custom RAL |
| Finishes: | 24K Gold, Polished, Brushed |
| Regulations | |
| IP Rating: | IP64(5) |
(1) With dedicated preset.
(2) The specified frequency range applies only when using the dedicated FULL-RANGE preset. This preset is available exclusively on 4-channel amplifiers or amplifiers equipped with firmware EBS.
(3) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
(4) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
(5) More complete water protection with K-IP65KITA and K-IP65KITB accessories (IP65 compliant)
Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
Thunder-KS4P I
| General | |
|---|---|
| Type: | Passive subwoofer |
| Transducers: | 2 x 18″ neodymium magnet woofer |
| Frequency Response: | 30 Hz – 150/450 Hz (-6 dB) crossover dependant(1) |
| Crossover: | DSP-controlled, Low Pass @ 150 Hz, preset dependant |
| Max SPL: | 141dB(2) |
| Coverage: | Omni |
| Rated Power: | 2800W peak |
| Connectors: | 2x speakON 2+ 2- / 1+ 1- link |
| Nominal Impedance: | 4ohm |
| Handling and Finishes | |
| Dimensions (W x H x D): | 1106 x 500 x 580 mm (3) (43.5 x 19.7 x 22.8 in) |
| Weight: | 53,2 kg (117.3 lb) |
| Material: | Polyurea coated birch plywood |
| Colors: | Black/White/Custom RAL |
| Regulations | |
| IP Rating: | IP54(4) |
(1) With dedicated preset
(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
(3) Included 17 mm (0.7 in) removable rubber feet
(4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..),
we recommend to further protect the subwoofer. Contact K-array directly to discuss best protection practices.
Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
Kommander-KA208LIVE+
| General | |
|---|---|
| Type: | 8ch switching mode, Class D Amplifier |
| Output Power: | 8 x 2500W @ 4Ω(1) |
| Impedance: | minimum 4 Ω |
| Frequency Response: | 20 Hz – 20 kHz (±1 dB) |
| Connections: | Input: 8x XLR-F bal input Output: 4x SpeakON NL4 speaker output – 2x CA-COM connections Remote connectivity: 2x Ethernet RJ45 – EtherCON 1x USB-A Digital channel count 8x IN Power: 1 x PowerCon TRUE IN 1 x PowerCon TRUE Link |
| Built-in DSP: | Grouping, Equalization, Limiters, Routing, Level, Loudspeaker presets |
| Remote Control: | Web dedicated APP and Desktop software (connected via Ethernet) |
| Power Handling | |
| Power Consumption: | 1200 W @ 4 Ω load, Pink noise, 1/8 rated power |
| Protections: | Thermal protection, output short circuit, RMS output current protection, high frequency protection, power limiter, clip limiter. |
| MAIN Operating Range: | 100-240V AC, 50-60 Hz with PFC |
| Handling and Finishes | |
| IP Rating: | IP20 |
| Dimensions (W x H x D): | 430 x 87 x 430 mm (17 x 3,4 x 17 in) |
| Weight: | 10 kg (22 lb) |
| Material: | Stainless Steel |
(1) CTA-2006 Standard single channel driven