Python-KP52 I
| General | |
|---|---|
| Type: | Line array |
| Transducers: | 6 x 3.15″ neodymium magnet woofers |
| Frequency Response: | 120 Hz – 18 kHz (-6 dB)
(1) |
| Max SPL: | 128 dB (peak)
(3) |
| Rated Power: | 360 W AES |
| Coverage: | V. 10° – 45° | H. 90° |
| Connectors: | SpeakOn NL4 1+ 1- (signal); 2+ 2- (through) |
| Nominal Impedance: | 8 Ω / 32 Ω selectable |
| Handling and Finishes | |
| Dimensions (W x H x D): | 89 x 520 x 118 mm (3.5 x 20.5 x 4.7 in) |
| Weight: | 5.8 kg (12.78 lb) |
| Material: | Stainless Steel |
| Colors: | Black, White, Custom RAL |
| Regulations | |
| IP Rating: | IP64
(5) |
| EN54-24: | EN 54-24:2008 compliant(6) |
(1) With dedicated preset.
(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m
Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
Thunder-KS2 I
| General | |
|---|---|
| Type: | Active subwoofer |
| Transducers: | 18″ neodymium magnet woofer |
| Frequency Response: | 35 Hz – 150/450 Hz (-6 dB) crossover dependant(1) |
| Crossover: | DSP-controlled, Low Pass @ 150 Hz, preset dependant |
| Max SPL: | 137 dB(2) |
| Coverage: | Omni |
| Coverage: | Line Input 2x XLR-F analog / AES3 Line Output 2x XLR-M Link analog / AES3 Speaker Output 2x SpeakON NL4 Mains powerCON TRUE1 TOP Networking and Data 1x RJ45 4x USB-A |
| Connectors: | 2 x Speakon NL4 2+ 2- signal / 1+ 1- link |
| Nominal Impedance: | 8ohm subwoofer |
| Controllers: | Wi-Fi dedicated Mobile APP K-framework3 via wired Ethernet connection |
| Handling and Finishes | |
| Dimensions (W x H x D): | 650 x 500 x 580 mm (3) (25.6 x 19.7 x 22.8 in) |
| Weight: | 37,6 kg (82.9 lb) |
| Material: | Polyurea coated birch plywood |
| Colors: | Black/White/Custom RAL |
| Amplifier | |
| Amp Module: | 4-ch Class D |
| Output Power: | 4 x 1500W @ 4ohm(5) |
| Power Consumption: | 600 W @ 8 Ω load, Pink noise, 1/4 rated power |
| Regulations | |
| IP Rating: | IP53(4) |
(1) With dedicated preset
(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
(3) Included 17 mm (0.7 in) removable rubber feet
(4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..),
we recommend to further protect the subwoofer. Contact K-array directly to discuss best protection practices.
(5) CTA-2006 Standard single channel driven
New materials and design are introduced into existing products without previous notice.