Thông số kỹ thuật
Mugello-KH2P I
| General | |
|---|---|
| Type: | Passive line array element |
| Transducers: | 2x 8” neodymium magnet woofer with 2.5” voice coil 2x compression driver with 2.5” voice coil |
| Frequency Response: | 120 Hz – 19 kHz (-6 dB)
(1) |
| Max SPL: | 142 dB peak(2) |
| Rated Power: | Bi-amp: HF: 250 Wpeak LF: 1200 Wpeak |
| Nominal Impedance: | HF: 16 ohm LF: 8 ohm |
| Coverage: | V. 20° digitally adjustable in array | H. 110° |
| Connectors: | SpeakON 1 1+ 1- Driver 250W@16ohm 2+ 2- Woofer 1200W@8ohm SpeakON 2 Link (SpeakON 1) |
| Handling and Finishes | |
| Dimensions (W x H x D): | 860 x 370 x 210 mm (33.8 x 14.6 x 8.3 in) with rigging hardware 735 x 285 x 200 mm (28.9 x 11.2 x 7.9 in) net dimensions |
| Weight: | 24 kg / 53 lb (with rigging hardware) |
| Material: | Polyurea coated birch plywood |
| Colors: | Black, White, Custom RAL |
| Regulations | |
| IP Rating: | IP54(3) |
(1) With dedicated preset
(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
(3) In case of permament, long lasting outdoor installation, we recommend to further protect the speaker.
Contact K-array directly to discuss best protection practices.
Thunder-KS3P I
| General | |
|---|---|
| Type: | Passive subwoofer |
| Transducers: | 21″ neodymium magnet woofer |
| Frequency Response: | 30 Hz – 150/300 Hz (-6 dB) crossover dependant(1) |
| Crossover: | DSP-controlled, Low Pass @ 150 Hz, preset dependant |
| Max SPL: | 139 dB(2) |
| Rated Power: | 2800W peak |
| Nominal Impedance: | 4Ω |
| Coverage: | Omni |
| Connectors: | 2x speakON 2+ 2- / 1+ 1- link |
| Handling and Finishes | |
| Dimensions (W x H x D): | 735 x 580 x 700 mm (28.9 x 22.83 x 27.55 in)(3) |
| Weight: | 49,2 kg (108.5 lb) |
| Material: | Polyurea coated birch plywood |
| Colors: | Black, White, Custom RAL |
| Regulations | |
| IP Rating: | IP54(4) |
(1) With dedicated preset
(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
(3) Included 17 mm (0.7 in) removable rubber feet
(4) In case of permament, long lasting installation in critical environments (swimming pools, beaches, yachts..), we recommend to further protect the subwoofer. Contact K-array directly to discuss best protection practices.
Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.
K-RACK-M-208
| General | |
|---|---|
| Type: | 8ch switching mode, Class D Amplifier |
| Output Power: | 24 x 2500W @ 4Ω(1) |
| Impedance: | minimum 4 Ω (2 Ω tolerant) |
| Connections: | Input: 4x XLR-F bal input 4x XLR-M bal parallel link Output: 12x NL4 SpeakON connectors (24 channels) Remote connectivity: 2x RJ45 ports Wi-Fi IEEE 802.11 b/g/n Power: 3-phase CEE 3P+N+T 32A 400V main socket 1x powerCON auxiliary AC main out |
| Built-in DSP: | Grouping, Equalization, Limiters, Routing, Level, Loudspeaker presets |
| Remote Control: | Ethernet dedicated desktop software |
| Power Handling | |
| Protections: | Thermal protection, output short circuit, RMS output current protection, high-frequency protection, power limiter, clip limiter. |
| MAIN Operating Range: | 3-phase 32A 400V main |
| Power Consumption: | 3600 W @ 4 Ω load, Pink noise, 1/8 rated power |
| Handling and Finishes | |
| Dimensions (W x H x D): | 600 x 820 x 730 mm (23,62 x 32.28 x 28.74 in) |
| Weight: | 97,2 Kg (214.29 lb) |
| Regulations | |
| IP Rating: | IP20 |
(1) CTA-2006 Standard single channel driven
Reviews
There are no reviews yet.