K-Array Turtle-KRM33P

  • Thương hiệu: K-Array – Ý
  • Sản xuất: Ý
  • Loa Active 3 x 3.15″ – 1 x 6″
  • Công suất: 300W – 8Ω
  • Tần số: 70Hz – 20kHz
  • Max SPL: 121dB
  • HxWxD: 10.3 x 26.6 x 30.2cm – 5.2kg
  • Bảo hành: 12 tháng

Giá sản phẩm tham khảo:

tư vấn báo giá hoặc đặt hàng

(Báo giá đối với những sản phẩm chưa được niêm yết tại website Cơn Bão Số)

HOTLINE liên hệ trực tiếp: 0906 845 728 

Thông số kỹ thuật

ACOUSTICS 
Power handling 180W (AES)
Frequency range 70 Hz – 18 KHz +/- 3dB
100 Hz – 18 KHz +/- 3dB
SPL 1W/1mt 93 db
Maximum SPL 115dB (cont) – 121dB (peak)
COVERAGE 
Horizontal DSP controlled (30° / 70° selectable)
Vertical 90°
CROSSOVER 
Type DSP controlled
Frequency 70 Hz minimum (preset dependent)
TRANSDUCERS 
Type 3 X 3,15” Neodymiun cone driver with 1” voice coil
Type 1 X 6” passive radiator
SELECTION SWITCH 
Horizontal pattern Spot – Flood
Response Bass Enhancer
AUDIO INPUT 
Analog connector 1 male + 1 female 3-pin balanced XLR
REMOTE CONTROL INPUT 
Connector 1 USB type B
POWER INPUT
Connector 2 x PowerCon IN/OU
AMPLIFIER
Type 1 module class D – DSP controlled
Nominal power output 2 X 125 W @ 4 Ω 1% THD + NOISE
Protection Dynamic limiter – Over current – Short circuit
Frequency response 20 Hz – 20 KHz, all load +/- 0.5 dB
Damping factor 8Ω, 100Hz > 500
THD+N 1KHz, 1 W 0.003%
AC POWER
Nominal voltage 115 / 230 Vac auto switching
Operating range 85 – 132 Vac 170 – 264 Vac 50 – 60 Hz
I. Nom 2 A / 115 Vac 1 A / 230 Vac
CONSUMPTION 85 – 265 Vac
Quiescent power (with no signal in) 10 W
1/8 rated power (pink noise) @ 4 Ω 110 W
Peak power 660 W / 120 ms
CERTIFICATION
IP 40
PHYSICAL OVERVIEW
Dimensions 26.6 x 10.3 x 30.0 cm (10.47” x 4.05” x 11.81”)
Weight 5.2 Kg (11.46 lb)

Reviews

There are no reviews yet.

Be the first to review “K-Array Turtle-KRM33P”