K-Array Mugello-KS5

  • Thương hiệu: K-Array – Ý
  • Sản xuất: Ý
  • Loa active subwoofer
  • Ampli class D / 2 x 3500W @ 2Ω
  • Tần số: 25Hz – 120kHz
  • Max SPL: 141dB
  • HxWxD: 59 x 116.2 x 85.1cm – 104.4kg
  • Bảo hành: 12 tháng

Giá sản phẩm tham khảo:

tư vấn báo giá hoặc đặt hàng

(Báo giá đối với những sản phẩm chưa được niêm yết tại website Cơn Bão Số)

HOTLINE liên hệ trực tiếp: 0906 845 728 

Thông số kỹ thuật

Type Subwoofer
Frequency Response 25 Hz – 120 Hz (-6 dB)
Transducers 2x 21” Neodymium magnet woofer with 5.31” voice coil
Maximum SPL 141 dB (peak)
Crossover Internal DSP presets (120 Hz maximum)
Coverage Omni
Internal Processing
Input sample rate and resolution Up to 96 kHz @ 24 bit with internal SRC and jitter correction
Built-in DSP Input gain, delay up to 330 ms,
8 full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth),
On-board preset,
Level and Temperature remote monitoring
Internal amplifier module
Type 2 ch. switching-mode, class D
Peak output power 2 X 3500 W @ 2 Ω 1% THD+N
Operating range 100-240V AC, 50-60 Hz with PFC
Power consumption 600 W @ 4 Ω load , Pink noise 1/8 rated power
Protections Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection,
Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection
Mains connector powerCON True with link inlet
Controls and Connectivity
Controls Remote control with dedicated PC software via USB or RS485.
On-board touch screen display.
Connectivity Analog:
2x XLR (bal) input signal
2x XLR (bal) parallel output
1x XLR AES3 input
1x XLR AES3 output
Remote connectivity:
1x XLR RS485 serial input
1x XLR RS485 serial output
1x USB-B inlet
1x powerCON
1x powerCON link
Handling and Finish
Dimensions (WxHxD) 4 1162 x 590 x 851 mm (45.7 x 23.2 x 33.5 in)
Weight 104.4 kg (230.16 lb)
IP rating 20 (53 with K-AMPCOVER accessory)


There are no reviews yet.

Be the first to review “K-Array Mugello-KS5”