Thông số kỹ thuật
| General | |
|---|---|
| Type: | Active subwoofer |
| Transducers: | 2x 21″ Neodymium magnet woofer with 5.31″ voice coil |
| Frequency Response: | 25 Hz – 120 Hz (-6 dB)(1) |
| Max SPL: | 145 dB peak(2) |
| Remote Control: | Remote control with dedicated PC software via Ethernet |
| Coverage: | Omni |
| Connectors: | Analog: 1x XLR (bal) input signal 1x XLR (bal) parallel output Digital: 1x XLR AES3 input |
| Handling and Finishes | |
| Dimensions (W x H x D): | 1162 x 590 x 851 mm (45.7 x 23.2 x 33.5 in) (3) |
| Weight: | 104.4 kg (230.16 lb) |
| Material: | Wood |
| Colors: | Black, White, Custom RAL |
| Amplifier | |
| Amp Module: | 2-ch., switch mode, class D |
| Output Power: | 2x 3500 W @ 2 Ω 1% THD+N |
| Power Consumption: | 600 W @ 4 Ω load, Pink noise 1/8 rated power |
| Protections: | Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection, Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection |
| Operating Range: | 100-240V AC, 50-60 Hz with PFC |
| Mains Connector: | powerCON True with link inlet |
| Digital Signal Processor | |
| Built-in DSP: | Input gain, delay up to 2 s, Full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth), Level and Temperature remote monitoring |
| Regulations | |
| IP Rating: | IP53 |
(1) With dedicated preset
(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
Reviews
There are no reviews yet.