K-Array Firenze-KH8

  • Thương hiệu: K-Array – Ý
  • Sản xuất: Ý
  • Loa 8 x 8″ / 8 x 4″ / 4 x 1.4″
  • Ampli class D / 8 x 2000W @ 4Ω
  • Tần số: 60Hz – 18kHz
  • Max SPL: 145dB
  • HxWxD: 50 x 117 x 20cm – 75.2kg
  • Bảo hành: 12 tháng

Giá sản phẩm tham khảo:

tư vấn báo giá hoặc đặt hàng

(Báo giá đối với những sản phẩm chưa được niêm yết tại website Cơn Bão Số)

HOTLINE liên hệ trực tiếp: 0908 152 685 

Thông số kỹ thuật

ACOUSTICS
Power handling 2000 W(AES) + 800 W(AES) + 280W(AES)
Max Power 6160 W(AES)
Frequency range 60 Hz – 18 KHz (- 3dB)
SPL 1W/1mt
102.4 dB (Low) – 99.5dB (Mid) – 119 dB (High)
Maximum SPL 145 dB
COVERAGE
Horizontal 120°
Vertical Digitally adjustable
CROSSOVER
Frequency DSP controlled
300 Hz (Low-Mid); 1300 Hz (Mid-High)
TRANSDUCERS
Full range 8 X 8” Neodymium magnet woofer with 2.5” voice coil
8 X 4” Neodymium magnet woofer with 1.5” voice coil
4 X 1.4” Neodymium magnet compression driver
with 1.5” voice coil
REMOTE CONTROL & AUDIO IN/OUT
Connectors 1 Male + 1 Female LK25 connector (iP67)
Connection 1 Analog audio – 2 AES/EBU – Remote control over IP
POWER INPUT
Connector
1 x PowerCon TRUE1 (iP65)
AMPLIFIER
Type 2 Module class D with PFC – DSP controlled
Nominal Output Power 8 x 2000 W @ 4 Ω 1% THD + NOISE
Protection Over Temp. (Power Limiting – Thermal Shutdown),
Short Circuit/Overload Output Protection,
Power Limiting, Clip Limiter/Permanent Signal Limiter,
High Frequency Protection
Frequency Response 20 Hz – 20 kHz (+0-1 dB) for 1 W @ 8 Ω
Damping factor 100 Hz > 10000
THD+N 1W to Full Power @ 4 Ω 0.2%
Thermal dissupation 1/4 of max output power @ 4 Ω = 2000 BTU/h (505Kcal/h)
Efficiency > 75% (typical)
1/8 rated power (pink noise) @ 4 Ω per channel 1250 W
CERTIFICATIONS
Electronics 65
Speaker Box 45
PHYSICAL
Dimensions (Per Unit) 117 cm x 50 cm x 20 cm (46.1” x 19.7” x 7.88”)

Reviews

There are no reviews yet.

Be the first to review “K-Array Firenze-KH8”