Thông số kỹ thuật
| General | |
|---|---|
| Type: | Active line array element |
| Transducers: | 4x Coaxial 12″ Neodymiun magnet driver with 3″ voice coil + compression driver with 2″ voice coil |
| Frequency Response: | 90 Hz – 18 kHz (-6 dB)(1) |
| Max SPL: | 141 dB peak(2) |
| Rated Power: | 1200 W |
| Remote Control: | Remote control with dedicated PC software via Ethernet |
| Coverage: | 100° H / 30° V or 30° H / 100° V + digital adjustment with Electronic Beam Steering |
| Connectors: | Analog: 1x XLR (bal) input signal 1x XLR (bal) parallel output Digital: 1x XLR AES3 input |
| Handling and Finishes | |
| Dimensions (W x H x D): | 1170 x 350 x 200 mm (46 x 13.8 x 7.9 in) |
| Weight: | 52 kg (114.64 lb) |
| Material: | Stainless Steel |
| Colors: | Black, Custom RAL |
| Amplifier | |
| Amp Module: | 4-ch., switch mode, class D |
| Output Power: | 4x 2000 W @ 4 Ω 1% THD+N |
| Power Consumption: | 600 W @ 8 Ω load, Pink noise 1/8 rated power |
| Protections: | Over Temp. (Power Limiting – Thermal Shutdown), Short Circuit/Overload Output Protection, Power Limiting, Clip Limiter/Permanent Signal Limiter, High Frequency Protection |
| Operating Range: | 100-240V AC, 50-60 Hz with PFC |
| Mains Connector: | powerCON True with link inlet |
| Digital Signal Processor | |
| Built-in DSP: | Input gain, delay up to 2 s, Full parametric IIR filters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth), FIR filter for digital beam steering Level and Temperature remote monitoring |
| Regulations | |
| IP Rating: | IP53 |
(1) With dedicated preset.
(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 8 m then scaled at 1 m
Reviews
There are no reviews yet.