Thông số kỹ thuật
| General | |
|---|---|
| Type: | Point source |
| Transducers: | 6″ neodymium magnet woofer 2″ neodymium magnet woofer 6″ passive radiator |
| Frequency Response: | 50 Hz – 19 kHz (-6 dB)(1) |
| Sensitivity (1W/1m): | 90 dB |
| Max SPL: | 115 dB (peak)
(2) |
| Rated Power: | 160 W |
| Coverage: | V. 90° | H. 90° |
| Connectors: | 4PIN euroblock connector (included) |
| Nominal Impedance: | 8 Ω / 32 Ω selectable |
| Handling and Finishes | |
| Marine Treatments: | ✱ ONLY FOR KFC26M models – An epoxy-based CATHAPHORESIS treatment is applied by electroplating, ensuring a total coating with homogeneity of constant thickness in order to give metal surfaces considerable resistance to chemical and environmental corrosion. A special K-KUIP is included as well.(3) |
| Dimensions (W x H x D): | 180 x 350 x 118 mm (7.1 x 13.8 x 4.6 in) (3)(4) |
| Weight: | 6.5 kg (14.3 lb) |
| Material: | Stainless Steel |
| Colors: | Black, White, Custom RAL |
| Finishes: | 24K Gold, Polished, Brushed |
| Regulations | |
| IP Rating: | IP64 IP65 (KFC26M or with K-KUIP accessory) (5) |
(1) With dedicated preset.
(2) Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at 1 m.
(3) Only for the Marine Customization (KFC26M, KFC26MW)
(4) Removable rubber feet not included in measures
(5) More complete water protection with K-KUIP accessory.
Passive loudspeakers requires dedicated preset loaded on board of K-array amplifiers.
New materials and design are introduced into existing products without previous notice.